- Max Head , 102m
- Pressure, 16bar
- Temtperature, 350 °C
Hot Oil Pump Vlety 80-065-315
Horizontal volute casing pump in back pull-out design, single-stage, with ratings and dimensions to EN 733, radially split volute casing with integrally cast pump feet, replaceable casing wear rings, closed radial impeller with multiply curved vanes, single mechanical seal to EN 12756, double mechanical seal to EN 12756, drive-end bearings: Hot Oil Pump Vlety 80-065-315 rolling element bearings, pump-end bearings: plain bearings, with magnetless Volcano SuPremE motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 and PumpDrive variable speed system; ATEX-compliant version available.
Benefits Hot Oil Pump Vlety 80-065-315
- Improved efficiency and NPSHreq by experimentally verified hydraulic design of impellers (vanes)
- Operating costs reduced by trimming the nominal impeller diameter to match the specified duty point
- Little wear, low vibration levels and excellent smooth running characteristics thanks to good suction performance and virtually cavitation-free operation across a wide operating range
- Casing sealed reliably – even in varying operating conditions – by confined casing gasket
- Extended selection chart with additional pump sizes for small flow rates
- Easy to dismantle due to back pull-out design; no need to remove the pump casing from the piping
- Easy to dismantle using forcing screws at the interface between casing cover and bearing bracket
- Optimum venting via the highly effective VenJet ® venting chamber
- Top reliability with double mechanical seal in tandem arrangement
- High resistance by anti-seize product-lubricated carbon plain bearing or SIC/SIC bearing
Dimension Hot Oil Pump Vlety 80-065-315
Size | Dimension (mm) | ||||||||
---|---|---|---|---|---|---|---|---|---|
D1 | D2 | a5 | a1 | b5 | d5 | f5 | g1 | g2 | |
80-065-315 | 80 | 65 | 125 | 209 | 80 | 32 | 470 | 20 | 6 |
Size | Dimension (mm) | ||||||||
---|---|---|---|---|---|---|---|---|---|
D1 | D2 | h1 | h2 | i1 | i2 | l | m1 | m2 | |
80-065-315 | 80 | 65 | 225 | 280 | 60 | 24 | 80 | 160 | 120 |
Technical Data Vlety 80-065-315 volcano
- Max. head: 102 m
- Min. head: 2 m
- Max. allowed working pressure: 16 bar
- Max. allowed fluid temperature: 350 °C
Application Vlety 80-065-315 volcano
- Heat transfer systems
- Hot water circulation
- Oil transfer systems
1
2
3
4
5
6
7
1
Impeller
Fully enclosed, single-piece casting gives reliability, long trouble-free operation and high efficiency.
2
Shaft
The shaft is protected by a replaceable shaft sleeve in stainless steel.
3
Bearings
Ample dimensioned single and double row ball bearings improve the stiffness and minimize shaft deflection.
4
Shaft bearing bracket
The heavy duty console with incorporated lantern assures silent and reliable operation.
5
Shaft sealing
SCP pumps can be fitted with most sealing arrangements:
-soft packing
-mechanical seal
6
Pump case
The pump case is of rigid design with a generous wall thickness, giving good protection against erosion and corrosion.
7
Wear rings
Front and back ( in case of impeller dia. >500mm) renewable wear rings are furnished in order to achieve the best pump performance and ease the maintenance.
Technical Data Vlety 80-065-315
Function | Pump |
Connection Type | Flange |
Drive Concept | With electric actuator |
Max. flow rate | 754 m³/h |
Min. flow rate | 1.5 m³/h |
Max. head | 102 m |
Min. head | 2 m |
Mains frequency | 50 Hz, 60 Hz |
Mains voltage | 400 V 460 V |
Casing material | EN-GJS-400-15/A536 GRADE 60-40-18 |
Nominal pressure | PN 16 |
Max. allowed working pressure | 16 bar |
Suction behaviour | Non-self-priming |
Max. allowed fluid temperature | 350 °C |
Min. allowed fluid temperature | -30 °C |
Catalog Hot Oil Pump Vlety
Characteristic curves Hot Oil Pump Vlety 80-065-315
Vlety Assembly Drawing with part list
Vlety Assembly Drawing with part list
Assembly Drawing with part list Table
1 | Mechanical Seal | 23 | O-ring |
2 | Nut | 24 | O-ring |
3 | Screw | 25 | Screw for wearing rings fixing |
4 | Washer | 26 | Bearing cover |
5 | Ball bearings | 27 | Casing wearing ring |
6 | Screw | 28 | Impeller wearing ring |
7 | Air venting crews | 29 | Key |
8 | Screw | 30 | Key |
9 | Screw | 31 | Sleeve |
10 | Washer | 32 | Volute casing |
11 | Washer | 33 | Washer |
12 | Impeller fixing screw | 34 | Plate bearing |
13 | Gasket | 35 | Mechanical seal cover |
14 | Lock nut | 36 | Bearing bracket |
15 | Washer | 37 | Disc |
16 | Locking washer | 38 | Shaft |
17 | Leakage connection R1/2 | 39 | Spring pin |
18 | Volute casing cover | 40 | Seat ring holder |
19 | Foot | 41 | Screw |
20 | Impeller | 42 | Washer |
21 | Greaser | 43 | Gasket |
22 | Gasket | 44 | Lip Seal |
Vlety Assembly Drawing with part list
PUMP EXPLODED VIEW
PUMP EXPLODED VIEW Table
1 | Mechanical Seal | 23 | O-ring |
2 | Nut | 24 | O-ring |
3 | Screw | 25 | Screw for wearing rings fixing |
4 | Washer | 26 | Bearing cover |
5 | Ball bearings | 27 | Casing wearing ring |
6 | Screw | 28 | Impeller wearing ring |
7 | Air venting crews | 29 | Key |
8 | Screw | 30 | Key |
9 | Screw | 31 | Sleeve |
10 | Washer | 32 | Volute casing |
11 | Washer | 33 | Washer |
12 | Impeller fixing screw | 34 | Plate bearing |
13 | Gasket | 35 | Mechanical seal cover |
14 | Lock nut | 36 | Bearing bracket |
15 | Washer | 37 | Disc |
16 | Locking washer | 38 | Shaft |
17 | Leakage connection | 39 | Spring pin |
18 | Volute casing cover | 40 | Seat ring holder |
19 | Foot | 41 | Screw |
20 | Impeller | 42 | Washer |
21 | Greaser | 43 | Gasket |
22 | Gasket | 44 | Lip Seal |
Contact US
Do you want to contact a branch of Volcano ?
Do you have a question about a specific product, a service enquiry or a warranty claim? If so, please contact the local sales company in your country
Business Hours
Our support Hotline is available 24 Hours a day: 003197010281216
- Monday-Friday: 9am to 5pm
- Saturday: 10am to 2pm
- Sunday: Closed